|
||||||||
|
||||||||
Order Status
|
 | ||
| ||
| ||
 | Dauber-13Our latest reproduction for the 13, 14 1/2 OR 16 inch South Bend lathes*! This is that little dauber or quill oiler (*same SBL part number was used for each lathe), that almost ... | $15.99 |
| ||
| ||
| ||
 | FG-3.25FG-3.25- Premium float glass for use with abrasive paper as an accurate, "surface plate" in honing chisels and plane blades. This model is 3 inches wide, 11 1/2 inches ... | $14.99 |
| ||
| ||
| ||
 | FG-4.25FG-4.25- Premium float glass for use with abrasive paper as an accurate, "surface plate" in honing chisels and plane blades. This model is 4 inches wide, 11 1/2 ... | $16.99 |
| ||
| ||
| ||
 | Replacement black plastic handlesOur black, "dimpled" textured, plastic knob with stud (1/4" X 20 tpi X 3/4" long) . Use as a replacement, an extra set or for your own jigs and fixtures! Used ... | $5.86 |
| ||
| ||
| ||
 | SS1 Sharpening SledAlisam Engineering’s “Sharpening Sled™” is the easiest, fastest most precise hand sharpening/honing guide on the market. The model #SS1 is for ... | $69.99 |
| ||
| ||
| ||
 | SS1A Side supportThe optional side supports, model #SS1A will enable the owner of our taller Sharpening Sled, model #SS2, to convert it to our shorter model #SS1 guide. | $32.99 |
| ||
| ||
| ||
 | SS2 "Original style"Sharpening SledAlisam Engineering’s “Sharpening Sled™” is the easiest, fastest most precise hand sharpening/honing guide on the market. The model #SS2 "original ... | $59.99 |
| ||
| ||
| ||
 | SS2 Sharpening SledThe new Model #SS2 is the enhanced 2 inch Sharpening Sled model. Increased blade capacity to 3 inches wide and stone width up to 4 inches wide. Increased bevel angle range from 5 to ... | $79.99 |
| ||
| ||
| ||
 | SS2A Side supportThe optional side supports, model #SS2A will enable the owner of our shorter Sharpening Sled, model #SS1, to convert it to our taller model #SS2 guide. | $35.99 |
| ||
| ||
| ||
 | SS3 Sharpening SledThe Model #SS3 is our shortest Sharpening Sled model. Able to straddle stones up to 3/8 inches thick or for table top/surface plate work with abrasive paper or pastes. Increased ... | $74.99 |
| ||
| ||
| ||
 | SS3A Side supportThe #SS3A side supports convert any model to a short, table top/surface plate honing guide. If used with the #SS1 or the older style #SS2, be aware of the position of the detent ... | $32.99 |
| ||
| ||
| ||